FR4 PCB Assembly with PCB Assembly Quote
|Album||View larger image|
|Min. Hole Size||0.2mm|
|Min. Line Width||0.1mm|
1. Signal flow layout principle: signal flow arrangement -- left input, up input, down output. Avoid interleaving of input, output, high and low levels.
2. Proximity principle: consider the shape of each component. Size. Polarity and number of pins, for the purpose of shortening the alignment, adjust their position and direction.
3. Arrangement sequence principle: take each functional circuit as the core component (integrated circuit) as the center, and arrange around it -- the components belonging to the same functional module circuit are arranged together as much as possible. The components which are easy to produce mutual influence or electromagnetic interference should be kept away from or shielded as far as possible. As far as possible, the metal shell components should avoid contact, so as to avoid accidental short circuit caused by discharge, breakdown.
4. Principle of heat dissipation: heating elements should be arranged close to the shell or well-ventilated place with a radiator. For temperature-sensitive components, they should not be placed near the heat source or the upper part of the equipment.
5. Increase the mechanical strength of principle: mainly for large and heavy components, such as power transformer, large electrolytic capacitor, with heat sink of power transistor, etc., of the circuit board layout to pay attention to its center of gravity, gravity and vibration generated under the influence of mechanical stress, electronic print should use mechanical frame or braces, so as to avoid deformation. These components can be transferred to the base if necessary.
6. The principle of easy operation and safety: the arrangement of the whole machine structure should be considered when adjusting the original. In order to ensure the safety of debugging and maintenance, special attention should be paid to the components with high pressure, as far as possible in the operation of human hands can not easily touch.
PCB Assembly FAQ
Q: What is the MOQ?
A: The minimum order quantity of circuit board is 5pcs.
Q: What the package of the products?
A: We use vacuum packaging.
Q: Do you accept products design with different boards on the same panel?
A: Of course, we can do different boards on the same panel.
Q：What kind of material do you use in my design pcba?
A: We usually use FR4. And you can download FR4 Made Ability.
Q：What color is solder mask usually used in FR4 PCBA?
A : We usually use green in your custom PCBA.
Q: What kind of material do you use on PCBA PCB assembly surface finishing ?
A: FR4 PCB assembly usually uses HASL.
- Building D, Xintai Industrial Park, Xitou Second Industrial Zone, SongGang Town,Bao'an,Shenzhen,China
Focus on mobile phone clients